Tee branch H=35
Accessory is designed for branching of the cable routes in horizontal directions.
Н, height = 35 mm
Accessory | Cover of accessory | ||
Example of trays and accessories assembling |
Name | а, mm |
L, mm |
Accessories | Covers | ||||
Weight*, kg/pc. |
Article | Add to calculation | Weight*, kg/pc. |
Article | Add to calculation | |||
Tee branch 50х35 | 50 | 310 | 0,26 | 2341130 | шт. | 0,14 | 2341031 | шт. |
Tee branch 80х35 | 80 | 340 | 0,28 | 2342130 | шт. | 0,17 | 2342031 | шт. |
Tee branch 100х35 | 100 | 360 | 0,30 | 2343130 | шт. | 0,19 | 2343031 | шт. |
Tee branch 150х35 | 150 | 410 | 0,35 | 2344130 | шт. | 0,23 | 2344031 | шт. |
Tee branch 200х35 | 200 | 460 | 0,40 | 2345130 | шт. | 0,28 | 2345031 | шт. |
Tee branch 300х35 | 300 | 560 | 0,50 | 2346130 | шт. | 0,37 | 2346031 | шт. |
Metal thickness 0,8 mm
*)product weight is not more than, kg.
The present accessory can be applied in the cases, where the branching from existing segment of the route for the stipulated width is required.
For assembling it is necessary to cut out the side of the tray for the length L according to the table and fix the accessory with the help of:
- joint plates - 2 pcs.;
- screws М6х12 - 7 pcs.;
- nuts М6 with the incision - 7 pcs.
Material: steel sheet galvanized with the Sendzimir method.