Falling TEE with reducer level gradient H=50

  Accessory is designed for vertical branching of cable routes change of plane.

Н, height = 50 mm

Accessory		Cover of accessory
	Example of trays and accessories assembling

Name	а, mm	а1, mm	L, mm	Accessories			Covers
				Weight*, kg/pc.	Article	Add to calculation	Weight*, kg/pc.	Article	Add to calculation
Falling TEE with reducer level gradient 50/50х50	50	50	310	0,57	2351231	шт.Add	0,168	2351031	шт.Add
Falling TEE with reducer level gradient 100/100х50	100	100	360	0,87	2353233	шт.Add	0,305	2353033	шт.Add
Falling TEE with reducer level gradient 150/150х50	150	150	410	1,21	2354234	шт.Add	0,481	2354034	шт.Add
Falling TEE with reducer level gradient 200/100х50	200	100	360	1,23	2355233	шт.Add	0,613	2355033	шт.Add
Falling TEE with reducer level gradient 200/150х50	200	150	410	1,41	2355234	шт.Add	0,613	2355034	шт.Add
Falling TEE with reducer level gradient 300/200х50	300	200	460	2,00	2356235	шт.Add	0,983	2356035	шт.Add
Falling TEE with reducer level gradient 400/300x50	400	300	560	2,90	2357236	шт.Add	1,555	2357036	шт.Add
Falling TEE with reducer level gradient 500/300x50	500	300	560	3,39	2358236	шт.Add	1,905	2358036	шт.Add
Falling TEE with reducer level gradient 600/400x50	600	400	660	4,50	2359237	шт.Add	2,702	2359037	шт.Add

Metal thickness 0,8 mm
*)product weight is not more than, kg.

The trays have the joints „Mother” - „Father”, which helps them to be joined with accessories and be fixed:
   - by screws М6х12 - 3 pcs.;
   - by nuts М6 with the incision - 3 pcs.

Material: steel sheet galvanized with the Sendzimir method.